Materials Used In 3D Printing: An Easy Guide To All 3D Printing Materials

Materials Used In 3D Printing | Image Resource : 3dprintingforbeginners.com

With the advent of 3D printing there has been an increase in the 3D printing materials. When we take a look at all the materials that are present we might get confused as to which one we should use for our next project that we might take up. But not to worry, this guide will help you distinguish between the pros and cons of all the materials that are present out there that can be put under the list of 3D printing materials.

Materials Used In 3D Printing: Choose The Best One Based On Your Need

There are plenty of materials that you can choose from when it comes to 3D printing and sometimes with so many choices in front of us it can become quite overwhelming. In order to understand which material to choose you can compare each and every one of them to decide.

1. ABS: This is a low cost material used in 3D printing. It is great for printing durable and tough parts which can withstand high temperature. ABS is known for its impact resistance and toughness hence allowing for you to print durable parts that has extra amount of usage and wear. However in order to use ABS you would need a heated bed or chamber, it also produces a pungent odour when it is printed.

2. Flexible: These filaments which are also referred to as TPU or TPE are known for being elastic which allows for the material to stretch and bend quite easily. This material is soft, flexible and does not require a heating bed or a chamber. It is difficult to print this filament and has poor bridging characteristics. This material however has a longer shelf life and has a good amount of impact resistance.

3. PLA: One of the go to materials used in 3D printing, most people tend to prefer this material due to the fact that how easy it is to use it. It is low in cost and is stiff and has a good amount of durability. However it has low amount of heat resistance and the filament is prone to breakage since it is quite brittle.

4. Nylon: A tough and a semi-flexible material which offers high impact and abrasion resistance, this material does not produce any unpleasant smell during the printing process. This material also has a good amount of abrasion resistance. However it is quite prone to warping and is not suitable for humid and moist environments.

With a list of the most preferred materials in the world of 3D printing it is now up to you as to which material you would choose for your next project!